HS116 cobalt base alloy surfacing welding wire
Description:
High wear resistance and high temperature strength, but less toughness, in the resistance to sulfuric acid, phosphoric acid, nitric acid and other conditions was excellent corrosion resistance
Sex.
use:
Mainly used in copper-based and aluminum alloy hot stamping die surfacing
Deposited metal chemical composition (%)
project | C | Ni | Mo | Cr | W | Fe | Co | Si | Mn |
guarantee value | 0.7-1.2 | - | 5.0-6.0 | 30.0-34.0 | 12.5-15.5 | ≤1.0 | margin | ≤1.0 | ≤0.5 |
Reference current (AC, DC - )
Diameter (mm) | 1.6 | 2.0 | 2.5 | 3.2 |
Welding current (A) | 50 ~ 100 | 100 ~ 200 | 200 ~ 300 | 300 ~ 400 |
Surfacing layer hardness HRC: ≥27
Precautions:
1. Protective gas: pure Ar; flow: 9 ~ 14L / min at current of 100 ~ 200A and 14 ~ 18L / min at current of 200 ~ 300A.
2. Tungsten extension length: 3 ~ 5mm; arc length: 1 ~ 3mm.
3. Wind speed limit ≤1.0m / s; it is recommended to pass argon gas protection on the back of welding area.
4. In welding, the size of the welding wire energy directly affects the mechanical properties of the weld metal and crack resistance, should pay more attention.
5. Welding parts of the rust layer, moisture, oil, dust, etc. in addition to net.
The above suggestions are for reference only, in the specific operation to the scene prevail. If necessary, process assessment and then determine the welding program.
related articles
The number of clicks:Update time:2017/12/26 19:11:35【print this page】